振動フィーダー

供給地点から下流設備まで適切なバルク材料を供給します。
デュアルモーター振動フィーダー Side-View Structure of a Vibratory Feeder Vibratory Feeders on Display in the Workshop Vibratory Feeders – Batch Presentation

振動フィーダー

A vibrating feeder moves material along a vibrating tray toward downstream equipment. The feed arrangement should be reviewed with the hopper, material behaviour and required flow. Identify the intended drive and control arrangement when comparing proposals.

A vibrating feeder can serve as the delivery stage between a material supply point and receiving equipment. Its duty is defined by the required material flow, the hopper arrangement and the operating sequence of the next machine. These requirements should be considered together.

  • Feed material: Maximum size, density, moisture and abrasion.
  • Feed rate: Normal/peak rate and operating cycle.
  • Hopper: Outlet size, head of material and loading method.
注文前に確認すべき事項
アイテム 確認すべき事項
Feed material Maximum size, density, moisture and abrasion
Feed rate Normal/peak rate and operating cycle
Hopper Outlet size, head of material and loading method
Downstream equipment Inlet position and feed requirements
Drive and controls Required start/stop sequence and electrical supply
インストール Mounting space, tray access and connection heights

Structural Details of Industrial Vibrating Feeders

Illustration of vibrating feeder: material supply, feeder tray, downstream equipment

Feeding Applications and Materials

A vibrating feeder can serve as the delivery stage between a material supply point and receiving equipment. Its duty is defined by the required material flow, the hopper arrangement and the operating sequence of the next machine. These requirements should be considered together.

Hopper Interface

Share the hopper outlet dimensions, loading method and available height. Include whether the feeder starts under a loaded hopper. The relationship between stored material and the feeder needs attention when defining the duty.

業務遂行

Describe the equipment receiving the material and its required feed conditions. State normal and peak rates and whether the flow needs to start and stop with another machine. A feeder enquiry should include the process sequence.

Illustration of vibrating feeder: vibrating tray, mechanical drive, discharge

How the Vibrating Feeder Works

Vibrating Tray

The tray uses vibration to move material toward its discharge. Material enters from the supply point and advances along the tray. The relationship between the tray, incoming material and required flow defines the feeding task.

Hopper Interface

The hopper outlet and material above it form part of the feeder installation. Loading method and starting conditions need to be understood alongside the requested rate. A feeder should not be selected independently of the way material reaches its tray.

Drive and Mounting

The drive and mounting arrangement belong to the actual feeder design. This page is intended for a mechanical vibrating feeder direction, subject to confirmation of the proposed equipment. An electromagnetic configuration is covered separately so the two are not presented as identical units.

設定、クリーニング、インストール

Tray and Connection Access

Allow room to inspect the tray and the connection to downstream equipment. Confirm contact surfaces, cleaning requirements and the mounting arrangement. Measured dosing, weighing and feedback controls should be specified separately from the basic material-transfer duty.

Material and Tray

Provide maximum lump size, density, moisture and handling concerns. Review contact surfaces, tray geometry and access around the installation. Do not assume a standard tray suits every powder, granule or lump material.

インストールと範囲

Confirm the connection positions, available service space and electrical supply for the proposed vibrating feeder. The quotation should identify the included drive, controls, supports and requested accessories. Check the agreed arrangement against the equipment documents before making permanent site connections.

ご注文前に

お問い合わせの際は、仕向国、梱包、書類、スペアパーツに関するご要望を必ずご記入ください。ご注文前に、実際の機器構成と取引範囲をご確認ください。性能評価に関する要件がある場合は、評価対象となる材料および運転条件を明記してください。.

Illustration of vibrating feeder: tray inspection, drive mounts, outlet connection, service access

関連商品

機器ガイドとサポート

ハオユアンについて

新郷浩源貿易有限公司は、中国に拠点を置く産業用選別装置および資材運搬装置のサプライヤーです。.

当社は、お客様の処理要件に基づいて、機器の選択肢、技術仕様、および利用可能な構成を検討するお手伝いをいたします。.

機器の選定から注文調整まで、当社はメーカーと協力して供給範囲、梱包、配送手配を明確にします。.

Does a feeder automatically provide weighing accuracy?
No. State whether you need material transfer, controlled flow or measured dosing. Weighing and feedback requirements must be defined separately.
Electromagnetic describes a particular drive approach. This enquiry should identify the proposed drive so you can compare the actual control and installation requirements.
Share the screen inlet position, required feed rate and available space. The connection and operating sequence can then be reviewed.
Provide the outlet dimensions, expected material level, loading method and whether the feeder starts under load. Include a sketch showing the feeder and downstream inlet.

今すぐお問い合わせください

グローバルフォーム

エンジニアに話す

グローバルフォーム